Schaffer 8620 T Telescopic Loader
larger imageMove mouse over the image to magnify
01467

Schaffer 8620 T Telescopic Loader

A new generation telescopic loader - environmentally friendly with reduced operating costs.

The 86 series of Schaffer loaders represent a new generation of telescopic wheel loaders. They meet the requirements of the exhaust gas level Tier IV final - the 8620 T achieves this without the need for a diesel particle filter, providing an environmentally friendly solution with a positive effect on operating costs. 

The next generation of loaders also utilise the latest Schaffer efficiency systems – all contributing to environmentally-friendly use of the machines and to the reduction of operating costs. These technologies focus on a more efficient conversion of fuel into performance, while increasing driving comfort. HTF ensures maximum thrust and is standard on all new generation telescopic wheel loaders.
Enquire

The 8620 T is Schaffer’s telescopic wheel loader with a wealth of options so you can configure it to suit your needs. The 8620 T has two engine options: a 75 kW/102 HP or 90 kW/122 HP Deutz engine. The standard driving speed is 20 kph, but there is also an option with a maximum speed of 40 kph - particularly advantageous for use outside the yard.

With an operating weight between 7 and 8t, a lifting height at the tool pivot point of 5.20m and a lifting capacity of 4,200kg, the new 8620 T telescopic wheel loader offers an ideal combination of features for demanding loading work. The loader is equipped with a hydraulically-driven fan as standard. Optionally, it can also be operated in reverse mode at the push of a button. The cooler is cleaned during operation – a benefit in all conditions, but particularly when working in dusty operating conditions. The drive concept of the 8620 T is also new: HTF (High Traction Force) and SPT (Schäffer Power Transmission) are standard equipment even with the smaller motor.

The 8620 T is particularly efficient in ECO driving mode, a fixed component of the 40 kph version. If conditions permit, the motor speed will reduce automatically from 2,300 revs to 1,800 revs – while maintaining the same speed. This allows a fuel saving of up to 10%. As well as reduced operating costs, benefits of ECO Mode include lower noise levels and more environmentally-friendly operation. And when higher performance is required again, the electronics automatically switch to the full rotational speed – a smart solution for efficiency and comfort.

The electronically controlled drive SPT comes as standard on the 8620 T. The particularly economical ECO Mode reduces the engine revs while maintaining the same speed - thus minimising fuel consumption. It also has the new SCV-Plus cabin, which sets new standards in terms of comfort, all-round visibility and ergonomics. It is simply one of the best cabins in this machine class.

  • Diesel engine: 4 cyl. Deutz Common Rail Turbo with Intercooler, Tier 4 final
  • Output: 75 kW (102 HP) / 90 kW (122 HP)***
  • Working weight cabin: 7050 kg - 7950 kg
  • Length with standard bucket: 6031 mm
  • Width: 2030 mm - 2180 mm
  • Height: 2770 mm / 2670 mm**
  • Turning radius: 2240 mm
  • Lifting capacity: 4200 kg
  • Tipping load straight, pallet fork*: 4640 kg
  • Lifting height (tool pivot): 5200 mm
*according to ISO 14397 (boom horizontal)
**Option: low cabin
***Option: powerfuller engine
 
STANDARD EQUIPMENT
 
  • Deutz Turbo diesel engine, 4 cylinders, water-cooled, 75 kW = 102 HP
  • Hydrostatic four wheel drive with automotive control
  • Tyres 18-22.5 TL AS
  • HTF (High Traction Force)
  • SPT (Schaffer Power Transmission)
  • Hydraulic quick gear 20 km/h switchable under load
  • Flow sharing working hydraulics, 105 l/min., proportional control of the telescopic arm
  • Planetary axles HD with limited slip differentials
  • Rear pendulum axle
  • Ferro-form sliding elements in the telescopic arm
  • Tool cylinder in the telescopic arm
  • Electric pressure relief of hydraulic couplings
  • Combined oil cooler
  • Hydraulic fan drive
  • SCV-Plus-Cabin (Silence, Comfort, View)
  • Multiple disk brake, maintenance free; service and parking brake 
  • Maintenance free articulation joint
  • 2 steering cylinders
  • 2 x working headlights front und 1 x rear
  • Lighting system without ABE (General approval certificate) according to ordinance StVZO
  • Z-bar boom with parallel lift
  • Additional control device electrically switchable on joystick
  • Depressurised return
  • Steering column adjustable in length and angle
  • Operating hours meter, rev counter, fuel and temperature gauge, engine monitoring
  • Adjustable armrest
  • Rear weight end and towing hitch
  • Main battery switch
  • Cyclone
  • Headstock type wheel loader with hydraulic tool lock

You might also be interested in ...

XL Silage Grab
The larger silage grab series is intended for Avant 500, 600 and 700 series loaders, with three different widths to match machines perfectly.
Demolition Grapple Bucket
The demolition grapple bucket with two hydraulic grapples is a strong and versatile attachment for handling of construction and demolition waste.
SLANETRAC HS 75 Saw Head
The HS75 Saw Head Attachment provides the ability to cut dense material; cutting up to 250mm thickness using a blade diameter of 750mm.
Generator - 3.5kva
Read More
   
LOCATIONS
Pukekohe 8 Nelson Street
Pukekohe 2120
New Zealand

Mt Wellington 36 Lunn Avenue
Mt Wellington
Auckland 1072
New Zealand
 
OPEN
Monday to Friday
7:30am to 5pm
 
CONTACT US
  • fb